Detailed Product Description

Properties, features & Characteristics:

1.       Appearance: Dark brown powder or liquid. Non-poisonous, oodles, non-flammable and non-corrosive to steel bars.

2.       As a condition of blending in which amount of cement and collapsibility are fixed forehead, mixing water can be decreased by 8-25% when it is admixed at 0.31.5*% with reinforced concrete. Compression strength is increased rapidly. Statistically, compression strength on the 28^th day after single application is increased by more than 20% when it is added at standard blend dosage. As a result, the setting properties of concrete will improved to some extent.

3.       Improve miscibility of concrete amalgamator with water and collapsibility as well. As a condition of equivalent blending (i.e. water-cement ratio and amount of cement fixed), collapsibility can be increased by 12cm when it is added at standard blend dosage.

4.       As a condition of blending which is preconditioned by equivalent collapsibility and strength, 12% of cement can be reserved when the agent is added at blend dosage.

5.       The agent gives less crystallization in winter and surrenders smaller discounts of collapsibility in summer for seasonal reasons. Remarkable improvements of miscibility are shown when it is admixed at low blend ratio. Hence, flow ability of net slurry is in a slight shade. Water reduction of sand slurry is more critical for quality control than any other parameter. It can be concluded that it is suitable for large ratio and low-dose preparation.

Parameters & Acceptance criteria:

Parameters & Acceptance Criteria (For reference)

Recommended Blend dosage:

The normal blend dosage ranges from 0.3% to 0.8% in line with strength grade and scope of applicatons. The blend dosage for high and even ultrahigh-strength concrete runs between 0.81.8% the optimal blend dosage for powder is 0.75%. And the blend dosage for liquid is calculated on the dried basis.

Directions:

1.       Direct use of the powdery agent is allowed. Alternatively the addition of the agent can be followed by water moisturization(water-cement ratio:60%). The powder can be prepared accordingly and diluted to different concentration levels as required.

2.       The liquid agent can be added straightly or prepared accordingly and diluted to different concentration levels without surrendering and effect. The liquid agent is more powerful and effective than the powdery.

3.       the agent can be combined with other externally applied agents to generate special application effects if experimental practice is mature. Combination with any viscosity enhancer must be omitted.